Key Features & Benefits:

Conduct a thorough safety check on OBDII DLC port prior to connecting the scan tool or flashing ECU.

Constantly monitor the battery voltage with warning beeps in the event of weak battery condition.

Warning beep will alert when the voltage falls below 12V or when it rises above 15.2V while programming or coding.

Provides a quick check on the alternator charging condition.

Making voltage/frequency measurement at the pins during diagnosis communication with ECU when the engine will not start.

Detection of protocol and data communication during diagnosis and re-flash on the ECU.

Colored LED lights display when a protocol is detected, grounds and voltage.

OBD AID Specifications:

• Operating Range: 7.0 ~ 24.0VDC Input
• Maximum Load: Up to 5.0 amps Output
• Overload Protection: Equipped with PTC Fuse for added safety.
• Monitoring Voltages: Alerts for voltages below 12V and exceeding 15.2V.
• Supported Protocols: PWM (J1850), VPW (J1850), ISO 9141-2, DIS/ISO 14230-4, CANBUS (J-2284)
• OBDII Connector: 88mm in length, ensuring compatibility with standard OBDII ports.

With the DLC Port Voltage Checker, you can confidently assess and ensure the optimal functioning of your vehicle’s diagnostic and programming systems, streamlining your workflow and enhancing efficiency.