brand: danfoss/Danfoss
item no: 151G
model: OMM series
structure: gear type
loading type: cycloid motor
working pressure: 20
torque: 20
rated current: 0
rated voltage: 0
rated power: 5.2
rated speed: 1950rpm
speed type: low speed motor
processing customization: no
specifications: OML 8 151 G2001
specifications: OML12.5 151 G2002
specifications: OML 20 151 G2003
specifications: OML 32 151 G2004
specifications: OMM 8 151 G0040
specifications: OMM 20 151 G0002
specifications: OMM 32 151 G0006
specifications: OMM 50 151 G0013

OMM motor shaft extension form:
diameter 16 axis, flat key 5X5X16
diameter 15.875 shaft, flat key 4.8X4.8X19.05
diameter 16.5 shaft, spline B17X14,DIN5482
OMM motor oil port mode:
G3/8, G1/8
9/16-18UNF,3/8-24UNF
rear port G3/8,G1/8
rear ports 9, 16-18UNF,3, 8-24UNF

note:1. The use of the motor is the best industrial and mining choice. The rated industrial and mining industry is 1/3-2/3

2. The motors can be used in series or parallel. When the back pressure exceeds 10MPa during series or parallel connection, an external oil drain must be used to relieve the pressure. It is best to directly communicate the oil drain port with the oil tank.

Performance parameters and outline drawing:

displacement ml/r 8 12.5 20 32 40 50 speed r/min continuous 1950 1550 1000 630 500 400 intermittent 2450 1940 1250 800 630 500 torque N.m continuous 11 16 25 40 45 46 intermittent 15 23 35 57 70 88 power kW continuous 1.8 2.4 2.4 2.4 2.2 1.8 intermittent 2.6 3.2 3.2 3.2 3.2 3.2 pressure Mpa continuous 10 10 10 10 9 7 intermittent 14 14 14 14 14 14 flow L/min continuous 16 20 20 20 20 20 intermittent 20 25 25 25 25 25

1) Intermittent operation: A maximum of 10% of the time per minute is allowed to work under this condition.
2) Peak load: A maximum of 1% per minute is allowed to work under this condition.
3) Low-speed operation may cause unsmooth operation.